Protek-R Rotary Premix
IF WE EXPECT GOOD LONGEVITY AND TOP PERFORMANCE FROM OUR ROTARY ENGINES IT IS CLEAR THAT EXTRA LUBRICANT MUST BE ADDED TO THE FUEL.
CURRENTLY OUT OF STOCK
This is why; the oil metering system is responsible for lubricating the delicate apex seals, compression seals and housing surfaces that are common to every rotary engine. Oil is fed from the engine oiling system (oil-pan) to a variable ratio-metering pump, then it’s injected into the engine where it partially blends with the onrushing air-fuel charge.
This incomplete blending and fuel-to-oil ratios of 400:1*and higher are cause for alarm, but now add in unleaded fuels that are designed to clean piston engines, these fuels and the rotary’s high combustion temperature quickly clean away this small amount of oil leaving little or no lubrication. This causes increased friction and wear, resulting in decreased performance and longevity.
Comparison pic of Protek protected car and non user housing:
With over 25 years experience and more than 1000 rotary engines built, we know excessive wear on apex and compression seals as well as critical housing surfaces is caused from inadequate lubrication. What’s all this mean? Without proper lubrication friction, heat and today’s fuels will likely cause premature failure of some expensive engine parts, great for Mazda’s profits but not good for you and me.
By reducing friction and wear Protek-R can extend rotary engine life by 30% or more, depending on your driving habits and consistency of use. Protek-R blends completely with your fuel lubricating all critical surfaces, providing reduced friction and wear, adding longevity and keeping power.
In just one 24 hour race a Pettit Race Engine will get a lifetime of wear. With Protek-R in our fuel they show little engine wear compared to the average street engines we regularly disassemble.
TIP: In high wear situations (e.g. track or auto X day) use 2 "shots" of 120ml of Protek in your tank, along with premium fuel. For racing purposes Protek-R fuel lube is mixed with fuel at the ratio 100:1 or aprox. 1oz./gal of fuel. For everyday use, once measure of 120ml should be poured into the tank prior to filling with petrol.
CUT Friction GAIN Power! USE Protek-R!